Panasonic

Search Our Site

HD/SD and 3D Compatible Digital AV Mixer

 

 

  • Supports switching of 3D images, using dual SDI inputs.
  • Remote control of power on/off and shutter on/off for the Panasonic projectors.superimposed on the monitor
  • A waveform monitor (WFM) is built-in, and source names and audio levels areand all source images on a single monitor
  • Multi-View function displays Preview (PVW), Program (PGM)
  • DVI-I input accommodates both motion and still images from a PC
  • Digital interfaces of SDI (HD/SD) input/output and HDMI (HD) input
  • HD/SD multi video format compatibility.

 

 

 

Specifications :

 

Power Consumption 60 W
Power Supply 100-230 VAC 50/60 HZ
Operating Temperature 5 to 40° C (41 to 104 °F)
Operating Humidity 10 to 80 % (no condensation)
Storage Temperature -20 to 60 °C (-4 to 140 °F)
Storage Humidity 10 to 80 % (no condensation)
System Format HD: 1080/23.98PsF (for 3D only), 1080/59.94i, 1080/50i, 720/59.94p, 720/50p
SD: 480/59.94i, 576/50i
Signal Processing 4:2:2:4, 12 bit internal
Sampling Frequency 48 kHz
Quantization 16 bit for HDMI input
24 bit for SDI input
20 bit for analog input
Dynamic Range More than 90 dB at 1 kHz (digital), More than 85 dB at 1 kHz (analog)
THD Less than 0.05 % at 1 kHz (digital)
Less than 0.08 % at 1 kHz (analog)
Cross Talk Less than -80 dB at 1 kHz, between any two channels (digital)
Less than -70 dB at 1 kHz, between any two channels (analog)
Headroom 20 dB and 18 dB switchable
Analog Composite Input BNC (2 sets), 1.0 V [p-p], 75ohm termination
SDI Input BNC (4 sets)
SD serial digital signal: SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal: SMPTE292M/296M/299M standards
HDMI 2 HDMI connector (Type A connector)
Reference Input 2 BNC (with loop-through), 1.0 V [p-p], 75ohm auto termination
Composite signal (NTSC/PAL)
Program (PGM) output 1 SDI (BNC)
SD serial digital signal: SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal: SMPTE292M/296M/299M standards
1 DVI-D, TMDS single link
Preview (PVW) Output 1 SDI (BNC)
SD serial digital signal: SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal: SMPTE292M/296M/299M standards
Aux 1 SDI (BNC)
SD serial digital signal: SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal: SMPTE292M/296M/299M standards
Multi-viewer 1 SDI (BNC)
SD serial digital signal: SMPTE259M-C and ITU-R BT.656-4 standards
HD serial digital signal: SMPTE292M/296M standards
1 DVI-D, TMDS single link
Advanced Reference Output 1 BNC, 75ohm
Composite signal sync: 0.286 V [p-p] (NTSC) /0.3 V [p-p] (PAL)
Burst: 0.286 V [p-p] (NTSC) /0.3 V [p-p] (PAL)
Audio Input / Output
Audio Input XLR: 4 sets (L and R), 4/0/-3 dBm switchable, balanced, 10k
SDI (BNC) (Embedded Audio): 4 sets
SD serial digital signal: SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal: SMPTE292M/296M/299M standards HDMI (Embedded Audio): connector x 2 sets (Type A connector)
AUX Input 1 Pin jack (L and R), -10 dBv, High impedance, unbalanced
Microphone Input 1 M6, -60 dBV, 2k, monaural, unbalanced
Program (PGM) output 1 XLR (L and R), 4/0/-3 dBu switchable, low impedance, balanced
1 SDI (BNC) (Embedded Audio)
SD serial digital signal: SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal: SMPTE292M/296M/299M standards
1 Pin jack (L and R), -10 dBV, low impedance, unbalanced
Preview (PVW) Output 1 SDI (BNC) (Embedded Audio)
SD serial digital signal: SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal: SMPTE292M/296M/299M standards
Aux 1 SDI (BNC) (Embedded Audio)
SD serial digital signal: SMPTE259M-C/272M-A and ITU-R BT.656-4 standards
HD serial digital signal: SMPTE292M/296M/299M standards
Headphones 1 M6, 8ohm, stereo, unbalanced, –infinity to –20 dBu
Other Ports TALLY: D-sub 9 pin, Open-Collector (8 CH)
Maximum current: Less than 50 mA
Maximum voltage: 35 VDC
GPI: 1 BNC, make-contact
RS-232C: 1 D-sub 9 pin
Dimensions (WxHxD) 16.75 x 7.75 x 15.75" (424 x 197 x 400 MM)
Weight 17.4 lb (7.9 kg)


 

Main Menu